Draper CS14A Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Пила Draper CS14A. Draper CS14A 12 страниц. 350mm chop saw
Также для Draper CS14A: Руководство по эксплуатации (16 страниц)
Печатать страницу
1. CUTTING HEAD LOCK (Fig.2)
When the saw is not in use the lock ✪✌ should be
used. To release pull the pin out and raise up the
head. To lock in the down position, lower the head
and push in pin until it engages.
2. ON/OFF SWITCH (Fig.3)
To start the chop saw, press the trigger locking
button ✫✌ and press the trigger ✬✌
simultaneously. The button ✫✌ can be released
and the saw will continue running until the trigger
ie released.
NOTE:
We suggest that when the machine is not in use.
The trigger be locked in the off position using a
padlock ✭✌ (not supplied) (Draper Tools
recommend Stock No. 60177).
3. ADJUSTING CUTTING DEPTH (Fig 4)
For deeper cuts screw the adjusting screw ✮✌
clockwise. For shallower cuts, screw ✮✌
anticlockwise when set in position use locking nut
✯✌ to secure in place.
4. WORK CLAMP (Fig 5)
For quick adjustment, disengage quick release
lever ✰✌. The vice clamp ✲✌ can now be pushed
in or out to accomodate the workpiece. Engage
the lever ✰✌ and finish tightening using the
clamping handle ✱✌.
OPERATION & USE
Fig. 2
✪✌
Fig. 3
✫✌
✬✌
✪✌
Fig. 4
✮✌
✯✌
Fig. 5
✲✌
✰✌
- 7 -
✭✌
Fig.2.
✱✌