Draper CSM355 사용 설명서 - 페이지 3

{카테고리_이름} Draper CSM355에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper CSM355 16 페이지. 355mm dry metal cutting saw

SPECIFICATION

The Draper Tools policy of continuous improvement determines the right to change specification without

notice.

Stock No..................................................................... 52657 ..............................................................55115

Part No ....................................................................... CSM355 ......................................................CSM355

Motor ......................................................................... 1650W ..........................................................1650W

Voltage....................................................................... 230V ................................................................110V

Speed ........................................................................ 1300rpm ....................................................1300rpm

Blade diameter .......................................................... 355mm ........................................................355mm

Bore diameter ............................................................ 25.4mm (1") ..........................................25.4mm (1")

Max capacity at 90°

Weight: ...................................................................... 24/30kg ......................................................24/30kg

Sound pressure level ................................................. 102db(A) ..................................................102db(A)

Sound power level .................................................... 112db(A) ..................................................112db(A)

IMPORTANT NOTICE: The blade is a consumable item, always allow the blade to cut freely. Do not force

the blade through the workpiece. This will result in poor cutting and damage to the TCT teeth.

The blade supplied is suitable for dry cutting mild steel and angle iron. It is not capable of cutting hard

steel or stainless steel. Certain materials will require the blade to be sharpened more frequently, for

example galvanised steel.

NOTE: Optional accessory blade for stainless steel, Part No. CSB355S, Stock No. 55805.

GUARANTEE

Draper tools have been carefully tested and inspected before shipment and are

guaranteed to be free from defective materials and workmanship for a period of 12 months from the date

of purchase except where tools are hired out when the guarantee period is ninety days from the date of

purchase.

Should the machine develop any fault, please return the complete tool to your nearest authorised

warranty repair agent or contact Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF.

England. Telephone: (023) 8026 6355.

If upon inspection it is found that the fault occurring is due to defective materials or workmanship, repairs

will be carried out free of charge. This guarantee does not apply to normal wear and tear, nor does it

cover any damage caused by misuse, careless or unsafe handling, alterations, accident, or repairs

attempted or made by any personnel other than the authorised Draper warranty repair agent.

This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are

not authorised.

Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to

verify your proof of purchase within the 12 month period.

Please note that this guarantee is an additional benefit and does not affect your statutory rights.

Draper Tools Limited

- Round .................... 130mm ..........................................................130mm

- Rectangular..................... 95 x 185mm ..........................................95 x 185mm

- Square..................... 120 x 120mm ......................................120 x 120mm

WEAR EAR PROTECTION.

- 2 -