Draper CSM355 Instructions Manual - Page 3
Browse online or download pdf Instructions Manual for Saw Draper CSM355. Draper CSM355 16 pages. 355mm dry metal cutting saw
Print Page
SPECIFICATION
The Draper Tools policy of continuous improvement determines the right to change specification without
notice.
Stock No..................................................................... 52657 ..............................................................55115
Part No ....................................................................... CSM355 ......................................................CSM355
Motor ......................................................................... 1650W ..........................................................1650W
Voltage....................................................................... 230V ................................................................110V
Speed ........................................................................ 1300rpm ....................................................1300rpm
Blade diameter .......................................................... 355mm ........................................................355mm
Bore diameter ............................................................ 25.4mm (1") ..........................................25.4mm (1")
Max capacity at 90°
Weight: ...................................................................... 24/30kg ......................................................24/30kg
Sound pressure level ................................................. 102db(A) ..................................................102db(A)
Sound power level .................................................... 112db(A) ..................................................112db(A)
IMPORTANT NOTICE: The blade is a consumable item, always allow the blade to cut freely. Do not force
the blade through the workpiece. This will result in poor cutting and damage to the TCT teeth.
The blade supplied is suitable for dry cutting mild steel and angle iron. It is not capable of cutting hard
steel or stainless steel. Certain materials will require the blade to be sharpened more frequently, for
example galvanised steel.
NOTE: Optional accessory blade for stainless steel, Part No. CSB355S, Stock No. 55805.
GUARANTEE
Draper tools have been carefully tested and inspected before shipment and are
guaranteed to be free from defective materials and workmanship for a period of 12 months from the date
of purchase except where tools are hired out when the guarantee period is ninety days from the date of
purchase.
Should the machine develop any fault, please return the complete tool to your nearest authorised
warranty repair agent or contact Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF.
England. Telephone: (023) 8026 6355.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship, repairs
will be carried out free of charge. This guarantee does not apply to normal wear and tear, nor does it
cover any damage caused by misuse, careless or unsafe handling, alterations, accident, or repairs
attempted or made by any personnel other than the authorised Draper warranty repair agent.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are
not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to
verify your proof of purchase within the 12 month period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited
- Round .................... 130mm ..........................................................130mm
- Rectangular..................... 95 x 185mm ..........................................95 x 185mm
- Square..................... 120 x 120mm ......................................120 x 120mm
WEAR EAR PROTECTION.
- 2 -