Draper 60606 사용 설명서 - 페이지 10
{카테고리_이름} Draper 60606에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 60606 12 페이지. Oil free compressors
페이지 인쇄
SYMPTONS
Compressor will not start.
Thermal overload trips.
Sudden loss of pressure when compressor
shuts off.
Noisy operation (knocking).
Air blowing from inlet
Low air output.
Excessive belt wear (where fitted).
Moisture in air output
Compressor runs continuously.
IMPORTANT: PLEASE NOTE ALL REPAIRS/ADJUSTMENTS
SHOULD BE CARRIED OUT BY A QUALIFIED PERSON.
SHOULD THE MACHINE REQUIRE TRANSPORTING TO A
REPAIR AGENT, ENSURE IT IS WELL PROTECTED AGAINST
DAMAGE IN TRANSIT.
DRAPER HELPLINE
(023) 8049 4344
TROUBLE SHOOTING GUIDE
POSSIBLE CAUSES
- 9 -
Power acble faulty.
No power source.
Fuse blown.
Circuit breaker open.
Motor thermal overload faulty.
Pressure switch faulty.
Pressure switch failure/
motor overload
Loose connections.
Safety valve leaking.
Faulty pressure regulation
valve.
Bearing failure.
Broken inlet valve(s).
Kinked hose.
Connections leaking.
Intake filter dirty.
Belt too loose/tight.
Pulley and flywheel
misaligned.
Caused by humidity.
Move to an area of
less humidity.
Drain condensate.
Defective pressure
switch.