Draper 60606 Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprężarka powietrza Draper 60606. Draper 60606 12 stron. Oil free compressors
Drukuj stronę
SYMPTONS
Compressor will not start.
Thermal overload trips.
Sudden loss of pressure when compressor
shuts off.
Noisy operation (knocking).
Air blowing from inlet
Low air output.
Excessive belt wear (where fitted).
Moisture in air output
Compressor runs continuously.
IMPORTANT: PLEASE NOTE ALL REPAIRS/ADJUSTMENTS
SHOULD BE CARRIED OUT BY A QUALIFIED PERSON.
SHOULD THE MACHINE REQUIRE TRANSPORTING TO A
REPAIR AGENT, ENSURE IT IS WELL PROTECTED AGAINST
DAMAGE IN TRANSIT.
DRAPER HELPLINE
(023) 8049 4344
TROUBLE SHOOTING GUIDE
POSSIBLE CAUSES
- 9 -
Power acble faulty.
No power source.
Fuse blown.
Circuit breaker open.
Motor thermal overload faulty.
Pressure switch faulty.
Pressure switch failure/
motor overload
Loose connections.
Safety valve leaking.
Faulty pressure regulation
valve.
Bearing failure.
Broken inlet valve(s).
Kinked hose.
Connections leaking.
Intake filter dirty.
Belt too loose/tight.
Pulley and flywheel
misaligned.
Caused by humidity.
Move to an area of
less humidity.
Drain condensate.
Defective pressure
switch.