Draper Dual Roller FlexShade NEXD 설치 및 작동 지침 - 페이지 6
{카테고리_이름} Draper Dual Roller FlexShade NEXD에 대한 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper Dual Roller FlexShade NEXD 10 페이지. Heavy-duty, clutch-operated window shade
Dual Roller FlexShade
Section 4 - Shade Fabric Roller Mounting
Caution: Do not allow shade roller to become exposed by lowering shade fabric too far.
Be sure to use stop balls provided by Draper
by others may be too small, and become lodged in clutch.
TOP ROLLER ASSEMBLY
Figure 5-A
!
Tube indentation
must be aligned
with the FLAT side
of the clutch sprocket.
BOTTOM ROLLER ASSEMBLY
Figure 5-C
!
Tube indentation
must be aligned
with the FLAT
side of the
clutch sprocket.
Figure 5-E
NEXD
®
to set up and down travel limits. Stop balls
®
1.
Carefully work
open
end
(clutch)
of TOP roller onto
bead chain clutch.
2.
3.
Carefully work
open
end
(clutch)
of BOTTOM roller
onto bead chain
clutch.
Please Note: If shade fabric is tracking to one side, see
"Field Adjustments," Page 2.
Figure 5-B
Slide idler pin end
of the top roller up,
through one of the
slots on idler endcap,
and into seat for pin.
NOTE: Illustration shows
different path options.
Figure 5-D
IDLER
LEVELING
5.
SCREW
Test shade to ensure that
roller is level and operating
properly.
If not, adjust idler leveling
screw with 3mm Hex Wrench,
available upon request when
ordering shade.
page 6 of 10
:
Illustration shows
NOTE
different path options.
4.
Slide idler pin end of the
bottom roller up, through one
of the slots on idler endcap,
and into seat for pin.
NOTE: Illustration
shows different
path options.