Draper Dual Roller FlexShade NEXD Instrukcja instalacji i obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Wyposażenie wnętrz Draper Dual Roller FlexShade NEXD. Draper Dual Roller FlexShade NEXD 10 stron. Heavy-duty, clutch-operated window shade

Drukuj stronę

Dual Roller FlexShade

Section 4 - Shade Fabric Roller Mounting

Caution: Do not allow shade roller to become exposed by lowering shade fabric too far.

Be sure to use stop balls provided by Draper

by others may be too small, and become lodged in clutch.

TOP ROLLER ASSEMBLY

Figure 5-A

Tube indentation

must be aligned

with the FLAT side

of the clutch sprocket.

BOTTOM ROLLER ASSEMBLY

Figure 5-C

Tube indentation

must be aligned

with the FLAT

side of the

clutch sprocket.

Figure 5-E

NEXD

to set up and down travel limits. Stop balls

Carefully work

open

end

(clutch)

of TOP roller onto

bead chain clutch.

Carefully work

open

end

(clutch)

of BOTTOM roller

onto bead chain

clutch.

Please Note: If shade fabric is tracking to one side, see

"Field Adjustments," Page 2.

Figure 5-B

Slide idler pin end

of the top roller up,

through one of the

slots on idler endcap,

and into seat for pin.

NOTE: Illustration shows

different path options.

Figure 5-D

IDLER

LEVELING

SCREW

Test shade to ensure that

roller is level and operating

properly.

If not, adjust idler leveling

screw with 3mm Hex Wrench,

available upon request when

ordering shade.

page 6 of 10

Illustration shows

NOTE

different path options.

Slide idler pin end of the

bottom roller up, through one

of the slots on idler endcap,

and into seat for pin.

NOTE: Illustration

shows different

path options.