Draper FlexShade 설치 및 운영 지침 - 페이지 3

{카테고리_이름} Draper FlexShade에 대한 설치 및 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper FlexShade 16 페이지. Exterior clutch-operated shade
Draper FlexShade에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (8 페이지), 설치 지침 (2 페이지), 사용 설명서 (12 페이지), 설치 및 작동 지침 (11 페이지), 설치 및 운영 지침 (12 페이지), 설치 및 운영 지침 (16 페이지), 설치 및 운영 지침 (4 페이지), 사용 설명서 (7 페이지), 설치 및 운영 지침 (12 페이지)

페이지 인쇄

FlexShade

Section 1 - Site Preparation

RECOMMENDED

PERSONNEL

1. Inspect all items prior to assembly:

a) Open cartons lengthwise and lay out all pieces.

b) Ensure that product is as ordered by checking

pieces against Page 1 of this document.

c) Arrange all pieces on flat surface in the general

manner they are to be installed.

2. Ensure mounting surface is strong enough to hold unit.

3. Look for any site conditions that could interfere with

installation or operation.

4. Verify unit measurements, ensuring it will fit in the

desired location.

Please Note:

Hem Bar does NOT retract into the Headbox.

Provide at least 2 1/4"

over a swinging window or door. Refer to Section

16, P. 15 for Hem Bar dimensions and details to

determine adequate clearance.

Please Note: Refer to appropriate sections within this document for different installation options:

SECTION 2, PAGE 4: Mounting Headbox with Brackets

(Standard Installation Method)

ENDCAP

DIMENSIONS

Crank-Operated ZIP

Please Note: Draper recommends that a team of at least TWO

Caution: Before mounting shades, verify measurements on label provided with shade,

and ensure unit is installed at correct width.

Please Note: Installer is responsible for selecting mounting hardware appropriate for site conditions.

clearance if mounting

(57mm)

3 "

(92mm)

(2)

E N D

2 "

(57 mm)

H E M

SECTION 5, PAGE 6: Direct Mounting to Ceiling or Wall

(Alternate Installation Method)

3 "

(92mm)

FlexShade

ZIP 92

Square

Headbox

page 3 of 16

people install this product.

C A P

B A R