Draper BDS368 사용 설명서 - 페이지 9

{카테고리_이름} Draper BDS368에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper BDS368 20 페이지. Belt and disc sander
Draper BDS368에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

MOUNTING THE SANDER TO A

WORKBENCH (Fig.3):

The sander should be fastened securely

to a firm supporting surface such as a

workbench. If mounting to a workbench,

place the sander in a suitable position

and mark the surface through the holes

in the base ✪✌. Remove the sander and

drill the holes, align and insert the bolts

and nut securely (fixings not supplied).

INSTALLING THE SANDING DISC

TABLE (Figs.4 & 5):

Locate the table ✫✌, bracket ✬✌ and

securing handle ✭✌. Remove the bolts

from the underside of the table and fit

the bracket. Now offer up the assembly

to the sander. Insert the locating lug into

the hole in the housing and secure it in

place with the locking handle ✭✌.

Using an engineers square (for example

Draper Stock No.34065), adjust the table

so it is square with the sander and

running parallel across the disc face

(approx. 2mm gap), then tighten the

bolts holding the bracket to the table.

INSTALLING THE DUST DEFLECTOR

(Fig.6):

Locate the pegs on each side of the dust

deflector ✮✌ into the slots on the dust

collection cover ✯✌.

ASSEMBLY

Fig.3

Fig.4

✬✌

✭✌

Fig.5

Fig.6

✯✌

- 8 -

✪✌

✫✌

2mm

✮✌