Draper Storm Force MT400 SF 대상 지침 - 페이지 10

{카테고리_이름} Draper Storm Force MT400 SF에 대한 대상 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper Storm Force MT400 SF 16 페이지. 400w 230v oscillating multi-tool kit
Draper Storm Force MT400 SF에 대해서도 마찬가지입니다: 사용 설명서 지침 (20 페이지)

페이지 인쇄

PREPARING THE POLISHER

NOTE: Remove the plug from the socket before

carrying out adjustment, servicing or maintenance.

8.1

FITTING THE AUXILIARY HANDLE -

FIG. 1

Choose the best orientation to suit operator

comfort and application in hand.

Pass the two hex. head bolts

handle

and into the threaded apertures in the

gearbox housing

supplied.

8.2

FITTING THE BACKING PAD -

FIGS. 2 - 4

Place the backing pad onto the spindle.

Carefully attach the backing pad in a clockwise

direction taking care not to cross the thread.

Press and hold the spindle lock button

firmly tighten the pad by hand.

NOTE: Never press the spindle lock button while

the spindle is in motion.

Simply align the bonnet with the backing pad as

per Fig.3 then press firmly in place. Once securely

fitted, roll the edges of the bonnet over as per

Fig.4.

through the

. Tighten with the hex. key

FIG. 2

and

FIG. 3

FIG. 4

FIG. 1