Draper Storm Force MT400 SF 대상 지침 - 페이지 12
{카테고리_이름} Draper Storm Force MT400 SF에 대한 대상 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper Storm Force MT400 SF 16 페이지. 400w 230v oscillating multi-tool kit
Draper Storm Force MT400 SF에 대해서도 마찬가지입니다: 사용 설명서 지침 (20 페이지)
페이지 인쇄
10. MAINTENANCE
10.1 MAINTENANCE
Regular inspection and cleaning reduces the necessity for maintenance operations and will
keep your tool in good working condition. The motor must be correctly ventilated during
tool operation. For this reason avoid blocking the air inlets. If replacement of the supply cord
is necessary this has to be done by the manufacturer or his agent in order to avoid a safety
hazard. Remove the plug from the socket before carrying out adjustment, servicing or
maintenance.
11. TROUBLESHOOTING
11.1 TROUBLESHOOTING
Problem
Motor does not start
Machine vibrates
12. DISPOSAL
12.1 DISPOSAL
- At the end of the machine's working life, or when it can no longer be repaired, ensure
that it is disposed of according to national regulations.
- Contact your local authority for details of collection schemes in your area.
In all circumstances:
• Do not dispose of power tools with domestic waste.
• Do not incinerate.
• Do not abandon in the environment.
• Do not dispose of WEEE*
as unsorted municipal waste.
* Waste Electrical & Electronic Equipment.
12
Cause
1. Fuse.
2. Brushes worn.
3. Other.
1. Pad/bonnet damaged
or out of balance.
Remedy
1. 13amp time delay fuse
or circuit breaker.
2. Replace brushes.
3. Authorised service agent.
1. Replace pad/bonnet.