Draper StormForce PT241SF 사용 설명서 - 페이지 11

{카테고리_이름} Draper StormForce PT241SF에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper StormForce PT241SF 16 페이지. 110w 230v 240mm polisher
Draper StormForce PT241SF에 대해서도 마찬가지입니다: 대상 지침 (16 페이지)

페이지 인쇄

SETTING THE POLISHER

NOTE: Excess pressure or misuse can lead to

FIG.2

deterioration of the bond between the sponge

backing pad and the polisher. Prior to each use

ensure the adhesion remains unaffected.

9.1 SWITCHING ON/OFF - FIG. 2

To switch the polisher 'on', press the switch forward

to the 'I' position. When switching 'on', ensure the

polisher is in contact with the surface to be polished

and only switch it 'off' after removing it from the

surface. To switch the polisher 'off', press the switch

backwards to the 'O' position.

Do not use excess pressure on this machine and do

not operate for long periods of time.

Apply the polish directly onto the bonnet, not the

work surface.

Apply the polish with one bonnet and use another

to buff the surface to a good shine.

NOTE: Excess polish maybe thrown out during

operation.

Do not use any abrasive materials.

9.2 DUST

For work activities involving exposure to fine dust a

mask rated to at least FFP2 should be used.

ATTENTION: Do not use in conjunction with rubbing

compounds or other products of a similar nature.