Draw tite 24963 설치 지침 - 페이지 3

{카테고리_이름} Draw tite 24963에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draw tite 24963 4 페이지. 2017 - current hyundai ioniq

1. Remove underbody panel – using a flat head screw driver and a 10mm socket, remove (5) push pin rivets and (2) hex nuts from the driver's side panel. NOTE: Two

(2) of the rivets connect the driver's side panel to the center panel.

2. Lower muffler – Using an exhaust hanger removal tool, lower muffler by removing (1) rubber hanger on the passenger's side and (1) forward hanger at center of

vehicle. A spray a lubricant or soapy water on rubber hangers makes them slide off metal pins more easily. NOTE: Using a ratchet strap or bungee cord, be sure

that exhaust is supported before removing rubber hangers.