Drawmer MX PRO MX60 운영자 매뉴얼 - 페이지 10

{카테고리_이름} Drawmer MX PRO MX60에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drawmer MX PRO MX60 20 페이지. Front end one audio processor
Drawmer MX PRO MX60에 대해서도 마찬가지입니다: 운영자 매뉴얼 (15 페이지)

페이지 인쇄

1. Control Descriptions

DYNAMICS STAGE

GATE

Threshold

Release

DE-ESSER

De-Ess

Male/ Female

COMPRESSOR

Threshold

Ratio

Gain

Dyn In

Sets the threshold below which signal is assumed to be

noise and therefore muted. Setting the control fully

clockwise turns the gate off. Red and green LEDs show the

gate's open/closed status.

Sets the release time of the gate. A fast release is suitable

for percussive sounds or other sounds having a fast

release envelope whereas the Slow setting is better suited

to sounds that have a naturally slow decay. The

programme adaptive circuitry further optimises the time

constants to suit the material being processed.

Set the degree of attenuation of sibilant sounds. The

MX60's de-esser is highly automated and so very easy to

adjust. When this control is turned fully anti-clockwise, the

de-esser is off.

Determines the frequency band in which sibilance is

detected. With certain voices, the opposite gender setting

may produce better results.

Sets the level above which gain reduction will be applied. A

four-LED gain reduction meter shows how much gain

reduction is being applied up to a maximum of 20dB.

Adjusts the compression ratio from 1:1 (no compression)

up to infinity:1 (limiting). Use the 1:1 position to 'bypass'

the compressor when using the de-esser or gate without

compression.

Provides 30dB to+20dB of gain adjustment to the

compressed signal.

Switches the complete dynamics section in or out of circuit.