Drawmer MX PRO MX60 운영자 매뉴얼 - 페이지 11
{카테고리_이름} Drawmer MX PRO MX60에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drawmer MX PRO MX60 20 페이지. Front end one audio processor
Drawmer MX PRO MX60에 대해서도 마찬가지입니다: 운영자 매뉴얼 (15 페이지)
페이지 인쇄EQUALISER STAGE
L.F Cut/ Boost
Mid Parametric
Frequency
Bandwidth
Cut/ Boost
H.F Cut/ Boost
E.Q In
TUBESOUND
Drive Lo
Drive Mid
Drive Hi
Ts In
High-pass shelving filter providing up to 18dB of cut or
boost below the turnover frequency of 100Hz.
Centre frequency of the mid-range parametric equaliser,
variable from 150Hz to 16KHz.
Bandwidth of mid-range parametric equaliser, variable from
0.3 to 3 octaves.
Controls the amount of mid-range cut or boost up to a
maximum of ±18dB.
Low-pass shelving filter providing up to 18dB of cut or
boost above the turnover frequency of 4.25KHz.
Switches the EQ section in and out of the signal path.
Sets the amount of overdrive in the low frequency range
(up to 350Hz).
Sets the amount of overdrive in the mid frequency range
(between 350Hz and 2KHz).
Sets the amount of overdrive in the high frequency range
(from 2KHz upwards).
Switches the Tubesound section in and out of the signal
path.
11