Bosch 46 HBN 44 설치 지침 매뉴얼 - 페이지 13

{카테고리_이름} Bosch 46 HBN 44에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch 46 HBN 44 28 페이지. Electric built-in single & double oven
Bosch 46 HBN 44에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (48 페이지), 사용 및 관리 매뉴얼 (48 페이지), 설치 지침 매뉴얼 (28 페이지)

페이지 인쇄

FINAL CHECK LIST

To prevent improper connections leading to dam-

age of electrical components and so voiding the

warranty, the following steps must be performed:

Check the electrical requirements and make

sure you have the correct electrical supply

and that the oven is properly grounded.

Make sure all control knobs are in the off po-

sition.

Turn on the power supply to the oven. When

the oven is first turned on the display will

come on showing all the call-outs and then

will become blank with the Set Clock sym-

bol in the upper right corner, as shown be-

low.

Check power at the junction box wires using

a volt meter having a range of 0-250 VAC. If

you have installed the oven for use on 240

volt supply you should find that the voltage

reading between the black and red wires

(Line to Line) should be 220 to 240 volts. If

you have modified the oven(s) for use on 208

volt the voltage reading between the black

and red wires should be 190 to 208 volts.

Set the time of day by pressing the Set

Clock button and pressing the plus (+) or mi-

nus (-) button, to the right of the display to

set the correct time. Once the time is set de-

press the Set Clock button to enter the time.

A "beep" will sound and the Set Clock sym-

bol in the upper right will disappear.

Turn the Mode Selector knob to Manual po-

sition, the Selector knob to Bake and turn the

Temperature knob to 350 °F. The cooling

fan, the oven lights and the heat light should

come on to indicate that the oven is heating.

The heat light will turn off when the set tem-

perature (350 °F) is reached. Turn Tempera-

ture knob to off. If you have installed a dou-

ble oven repeat test for second oven.

To check the other oven functions refer to

the Using the Oven Controls section of the

Use and Care Manual.

If the oven is working properly turn the Se-

lector knob(s) and the Temperature Control

knob(s) to their off positions and turn off the

power supply to the oven.

Place the cover on the junction box and

make sure the cover is securely fastened and

turn on the power to the oven.

10. Leave these INSTALLATION instructions

as well as the USE AND CARE MANUAL

with the owner.