Bosch Benchmark HBLP451RUC 서비스 매뉴얼 - 페이지 39

{카테고리_이름} Bosch Benchmark HBLP451RUC에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Benchmark HBLP451RUC 45 페이지. Built-in wall ovens
Bosch Benchmark HBLP451RUC에 대해서도 마찬가지입니다: 사양 (3 페이지), 설치 매뉴얼 (39 페이지), 설치 매뉴얼 (22 페이지)

페이지 인쇄

58300000181895 ARA EN A

7.2

Service Mode

Service mode provides access to Option Code settings, error

memory, relay tests, front panel tests, program version information

and EEPROM version information. It can be accessed at any time,

including while an error is displayed. If accessed while a mode is

running, the mode will be cancelled.

7.2.1

Accessing Service Mode

1. Press and hold Enter, numeric 1 and Bake for 5 seconds, or until

Service Mode appears in the display.

2. Press Next (soft key) to navigate through the menu. Additional

instructions will appear in the display.

3. Press Oven Clear/Off on single ovens or Upper Clear/Off on double

ovens to exit Service Mode any time (except while in the Front

Panel Test).

Table 8 reflects the Service mode menu options available.

Current version number for the UI software

Software revision

and EEPROM version

Displays current option code; press Edit (soft

key) to enter a new code. Press

Option code

key) or

If errors have been logged, press

Memory

Error Memory

error menu. Press

(soft key) to continue to Relay Tests.

Relay and DLB are turned on when soft key 3

is pressed. Soft key 2 turns off the previous

relay/DLB and advances to the next relay

Relay Tests

test option. Pressing

return to the main menu.

Cavity 1 Door Lock

Cavity 2 Door Lock

Cooling Fan

This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.

Enter

(soft

Enter

button to save.

Error

(soft key) to navigate through the

Back

(soft key) then

Back

(soft key) will

1901 Main St ▪ Suite 600 ▪ Irvine, CA 92614

JUNE 2014

Illumination

Cavity 1 Conv Fan

Cavity 2 Conv Fan

Cavity 1 Bake

Cavity 1 Broil

Cavity 1 Ring

10 Cavity 2 Bake

11 Cavity 2 Broil

12 Cavity 2 Ring

Front Panel Test

Table 8 Service mode menu options for Benchmark series wall ovens

7.2.2

Setting the Option Code

Option codes are programmed into the control module and are used

to define cavity type and oven configuration. In the event it becomes

necessary to manually program an option code in Service mode, the

table below can be used as a reference.

Model(s)

HBLP451LUC

HBLP451RUC

HBLP451UC

HBLP751UCC

HSLP751UCC

Table 9 Option codes for Benchmark series wall ovens

Service Manual for Bosch Benchmark Series Built-in Wall Ovens

Used to ensure the TCM is connected

and operating properly. The front

panel test is based on the Option

Code that was saved at the time

Service Mode was initiated. If the

code was changed, exit Service Mode

then start again. Press

Test

(soft key) to activate this test.

After all expected buttons have been

pressed, the display returns to the

main menu. Press

return to the first Service Mode menu

option. To exit the test, it must

either be successfully completed

or the power must be reset.

Option Code

Model

HBLP651LUC

3058

HBLP651RUC

HBLP651UCC

Start Panel

(soft key) to

Option Code

3358

Page 39 of 45

800 944-2904