Bosch Benchmark HBLP451RUC Руководство по эксплуатации - Страница 39

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Печь Bosch Benchmark HBLP451RUC. Bosch Benchmark HBLP451RUC 45 страниц. Built-in wall ovens
Также для Bosch Benchmark HBLP451RUC: Технические характеристики (3 страниц), Руководство по установке (39 страниц), Руководство по установке (22 страниц)

Bosch Benchmark HBLP451RUC Руководство по эксплуатации
58300000181895 ARA EN A
7.2

Service Mode

Service mode provides access to Option Code settings, error
memory, relay tests, front panel tests, program version information
and EEPROM version information. It can be accessed at any time,
including while an error is displayed. If accessed while a mode is
running, the mode will be cancelled.
7.2.1

Accessing Service Mode

1. Press and hold Enter, numeric 1 and Bake for 5 seconds, or until
Service Mode appears in the display.
2. Press Next (soft key) to navigate through the menu. Additional
instructions will appear in the display.
3. Press Oven Clear/Off on single ovens or Upper Clear/Off on double
ovens to exit Service Mode any time (except while in the Front
Panel Test).
Table 8 reflects the Service mode menu options available.
Current version number for the UI software
Software revision
and EEPROM version
Displays current option code; press Edit (soft
key) to enter a new code. Press
Option code
key) or
If errors have been logged, press
Memory
Error Memory
error menu. Press
(soft key) to continue to Relay Tests.
Relay and DLB are turned on when soft key 3
is pressed. Soft key 2 turns off the previous
relay/DLB and advances to the next relay
Relay Tests
test option. Pressing
return to the main menu.
1
Cavity 1 Door Lock
2
Cavity 2 Door Lock
3
Cooling Fan
Copyright by BSH Home Appliances Corporation
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
Enter
(soft
Enter
button to save.
Error
(soft key) to navigate through the
Back
(soft key) then
Back
(soft key) will
1901 Main St ▪ Suite 600 ▪ Irvine, CA 92614
JUNE 2014
4
Illumination
5
Cavity 1 Conv Fan
6
Cavity 2 Conv Fan
7
Cavity 1 Bake
8
Cavity 1 Broil
9
Cavity 1 Ring
10 Cavity 2 Bake
11 Cavity 2 Broil
12 Cavity 2 Ring
Front Panel Test
Table 8 Service mode menu options for Benchmark series wall ovens
7.2.2

Setting the Option Code

Option codes are programmed into the control module and are used
Next
to define cavity type and oven configuration. In the event it becomes
necessary to manually program an option code in Service mode, the
table below can be used as a reference.
Model(s)
HBLP451LUC
HBLP451RUC
HBLP451UC
HBLP751UCC
HSLP751UCC
Table 9 Option codes for Benchmark series wall ovens
Service Manual for Bosch Benchmark Series Built-in Wall Ovens
Used to ensure the TCM is connected
and operating properly. The front
panel test is based on the Option
Code that was saved at the time
Service Mode was initiated. If the
code was changed, exit Service Mode
then start again. Press
Test
(soft key) to activate this test.
After all expected buttons have been
pressed, the display returns to the
main menu. Press
return to the first Service Mode menu
option. To exit the test, it must
either be successfully completed
or the power must be reset.
Option Code
Model
HBLP651LUC
3058
HBLP651RUC
HBLP651UCC
Start Panel
Next
(soft key) to
Option Code
3358
Page 39 of 45
800 944-2904