Alemlube 660AS 소유자 기술 매뉴얼

{카테고리_이름} Alemlube 660AS에 대한 소유자 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alemlube 660AS 2 페이지. Underground coal mine trigger action grease gun

Alemlube 660AS 소유자 기술 매뉴얼
Underground Coal Mine Trigger Action Grease Gun
Description
The Alemlube 660AS, manufactured in Germany, is a heavy duty trigger action 450g grease gun designed for use
in the Australian Underground Coal market as the grease gun is 100% aluminium free.
Capable of delivering up to 1.1cc of grease per stroke at a maximum operating pressure of up to 8,500psi.
Supplied standard with a 30cm flexible extension & a 4 jaw coupler for those difficult to get at lubrication points.
The 660AS has a 600g capacity when using bulk grease & features a slip-type pressure/volume adjustment which
changes the gun from high pressure to high volume. 4 year warranty as standard.
Specifications
Uses
Grease Pressure
Delivery
Capacity
Operating instructions
There are two ways to fill the gun with grease:
A) 450g Grease Cartridge:
Unscrew the grease barrel from the gun and insert the 450g grease
cartridge by holding the barrel assembly & pulling therod back.
Remove cap from the grease cartridge, insert the cartridge into the
barrel & then rescrew the barrel assembly back onto the gun so that
the cartridge sits well against the follower cup. Once in position,
press the clamp down & push the rod firmly back into the barrel.
Important To Note:
When using the gun with a cartridge, the follower cup must
be folded back. The gun is supplied standard with the follower
cup in this position.
B) Bulk Grease Loading:
Unscrew the grease barrel from the gun head & insert the barrel into
the bulk grease. Suck the grease up into the barrel by pulling the rod
all the way back. When barrel is full with grease, rescrew the barrel
assembly back onto the gun head so that the follower sits well against
the grease. Press the clamp down & push the rod firmly back into
the barrel.
Important To Note:
When using the gun with bulk grease, the follower cup must be folded
forward. To do this, take the follower cup and rod assembly out of the
barrel, fold the follower cup forward and reassemble the barrel assembly.
Maintenance
Cleaning: always keep the follower cup free of impurities. Your grease
should be clear of any foreign particles, dirt etc and the gun should
be checked and cleaned regularly.
Air pockets in grease:
If the gun is pumped but no grease appears from the coupler: Depress the air bleeder valve on the head and pump
a few strokes. Unscrew the barrel assembly from the gun head with two or three turns and then push on the plunger
rod. With the follower cup engaged, the follower cup will move further down into the barrel venting any trapped air
out through the thread connections between the barrel and head. Unscrew the flex extension as well.
NSW/ACT
QLD/PNG
TEL: (02) 9677 1555
TEL: (07) 3204 9166
FAX: (02) 9675 1155
FAX: (07) 3204 1224
OWNER'S TECHNICAL MANUAL
450g Grease Cartridges, Suction loading, Bulk loader pump from bulk grease drum
Maximum operating pressure of up to 8,500psi
0.64cc per stroke (high pressure setting) / 1.1cc per stroke (high volume setting)
600g capacity when using bulk grease
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
Visit our website at
www.alemlube.com.au
WA
SA/NT
TEL: (08) 9302 4199
TEL: (08) 8241 7111
FAX: (08) 9303 2095
FAX: (08) 8241 7011
or
www.alemlube.co.nz
660AS
June 2019
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008
1