Alemlube 660AS Sahip Teknik Kılavuzu

Araçlar Alemlube 660AS için çevrimiçi göz atın veya pdf Sahip Teknik Kılavuzu indirin. Alemlube 660AS 2 sayfaları. Underground coal mine trigger action grease gun

Sayfayı Yazdır

Underground Coal Mine Trigger Action Grease Gun

Description

The Alemlube 660AS, manufactured in Germany, is a heavy duty trigger action 450g grease gun designed for use

in the Australian Underground Coal market as the grease gun is 100% aluminium free.

Capable of delivering up to 1.1cc of grease per stroke at a maximum operating pressure of up to 8,500psi.

Supplied standard with a 30cm flexible extension & a 4 jaw coupler for those difficult to get at lubrication points.

The 660AS has a 600g capacity when using bulk grease & features a slip-type pressure/volume adjustment which

changes the gun from high pressure to high volume. 4 year warranty as standard.

Specifications

Uses

Grease Pressure

Delivery

Capacity

Operating instructions

There are two ways to fill the gun with grease:

A) 450g Grease Cartridge:

Unscrew the grease barrel from the gun and insert the 450g grease

cartridge by holding the barrel assembly & pulling therod back.

Remove cap from the grease cartridge, insert the cartridge into the

barrel & then rescrew the barrel assembly back onto the gun so that

the cartridge sits well against the follower cup. Once in position,

press the clamp down & push the rod firmly back into the barrel.

Important To Note:

When using the gun with a cartridge, the follower cup must

be folded back. The gun is supplied standard with the follower

cup in this position.

B) Bulk Grease Loading:

Unscrew the grease barrel from the gun head & insert the barrel into

the bulk grease. Suck the grease up into the barrel by pulling the rod

all the way back. When barrel is full with grease, rescrew the barrel

assembly back onto the gun head so that the follower sits well against

the grease. Press the clamp down & push the rod firmly back into

the barrel.

Important To Note:

When using the gun with bulk grease, the follower cup must be folded

forward. To do this, take the follower cup and rod assembly out of the

barrel, fold the follower cup forward and reassemble the barrel assembly.

Maintenance

Cleaning: always keep the follower cup free of impurities. Your grease

should be clear of any foreign particles, dirt etc and the gun should

be checked and cleaned regularly.

Air pockets in grease:

If the gun is pumped but no grease appears from the coupler: Depress the air bleeder valve on the head and pump

a few strokes. Unscrew the barrel assembly from the gun head with two or three turns and then push on the plunger

rod. With the follower cup engaged, the follower cup will move further down into the barrel venting any trapped air

out through the thread connections between the barrel and head. Unscrew the flex extension as well.

NSW/ACT

QLD/PNG

TEL: (02) 9677 1555

TEL: (07) 3204 9166

FAX: (02) 9675 1155

FAX: (07) 3204 1224

OWNER'S TECHNICAL MANUAL

450g Grease Cartridges, Suction loading, Bulk loader pump from bulk grease drum

Maximum operating pressure of up to 8,500psi

0.64cc per stroke (high pressure setting) / 1.1cc per stroke (high volume setting)

600g capacity when using bulk grease

VIC/TAS

TEL: (03) 8787 8288

FAX: (03) 8787 8266

Visit our website at

www.alemlube.com.au

SA/NT

TEL: (08) 9302 4199

TEL: (08) 8241 7111

FAX: (08) 9303 2095

FAX: (08) 8241 7011

www.alemlube.co.nz

660AS

June 2019

TEL: (09) 447 1007

FAX: (09) 447 1008