Bosch HB.76 Series 사용 설명서 - 페이지 9

{카테고리_이름} Bosch HB.76 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch HB.76 Series 36 페이지.

페이지 인쇄

Change the recommended temperature using the control

knob.

Press the

button.

The oven comes on. The display shows the

When the dish is ready, turn off the oven with the

re-select and set.

Changing the temperature or grill setting

This can be done at any time. Turn the rotary selector to

change the temperature or grill setting.

Calling up the heating temperature

Press the

button briefly. The current heating temperature in

the cooking compartment is displayed for several seconds.

Pausing operation

Press the

button briefly. The oven is paused.

The

symbol flashes. Press the

continues.

To cancel working

Hold down the

button until the 3D hot air symbol

temperature of 160 °C are displayed. You can now reprogram.

Time functions

The time functions menu is accessed using the

following functions are available:

When the oven is off:

= set the timer

■

= set the time

■

When the oven is on:

= set the timer

■

= set the cooking time

■

= delay the end time

■

The square brackets around the symbol indicate that this

function has been selected. After pressing the

square brackets indicate the time function on the display panel.

Setting the time-setting options in brief

Press the

button to open the menu.

Select the desired function with the

symbol.

button or

button again, operation

and a

button. The

button, the

button.

Setting the cooking time

See section Time-setting options, setting the cooking time.

Setting a later end time

See the section entitled Time-setting options, Setting a later end

time.

Setting the rapid heating function

The rapid heating is not compatible with all types of heating.

Compatible types of heating

3D hot air

Top and bottom heating

Pizza function

When the programmed heating type is not compatible with

rapid heating, a warning signal is emitted.

Suitable temperatures

The rapid heating does not work when the set temperature is

below 100 ° C. If the oven temperature is slightly less than the

set temperature, rapid heating is not necessary. Not turned on.

Setting the rapid heating function

Press the button

for rapid heating. The

displayed beside the temperature. The temperature control

bars fill up.

The rapid heating function has ended when all the bars are lit.

A brief signal sounds. The

the oven.

Notes

Rapid heating is cancelled by adjusting the type of heating.

■

The programmed cooking time begins to run, regardless of

■

the rapid heating.

The oven temperature reached may be displayed while

■

heating by pressing on the button

To ensure uniform cooking, the food must not be put into the

■

oven until rapid heating has been completed.

Cancelling rapid heating

Press the

button. The symbol goes out.

Set the desired value with the rotary selector.

Press the

button to close the menu.

A detailed description of how to adjust each individual function

is provided below.

Short audible signal

If you cannot change or set a value, you will hear a short

audible signal.

Programming the timer

The timer works independently of the oven. It can be used as a

kitchen timer and programmed at any time. It does not matter

whether the oven is switched on or off.

Press the

button.

The time function menu opens. The [

square brackets indicates that the "Timer" function has been

selected.

Set the time for the timer using the control knob.

Close the menu with the

The time indicator shows the time elapsed from the set time.

symbol is

symbol turns off. Put the food in

] symbol between the

button.