Bosch HB.76 Series Instruction Manual - Page 9
Browse online or download pdf Instruction Manual for Oven Bosch HB.76 Series. Bosch HB.76 Series 36 pages.
Print PageChange the recommended temperature using the control
3.
knob.
Press the
button.
n
4.
The oven comes on. The display shows the
When the dish is ready, turn off the oven with the
5.
re-select and set.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Calling up the heating temperature
Press the
°
button briefly. The current heating temperature in
the cooking compartment is displayed for several seconds.
Pausing operation
Press the
n
button briefly. The oven is paused.
The
n
symbol flashes. Press the
continues.
To cancel working
Hold down the
n
button until the 3D hot air symbol
temperature of 160 °C are displayed. You can now reprogram.
Time functions
The time functions menu is accessed using the
following functions are available:
When the oven is off:
= set the timer
U
■
0
= set the time
■
When the oven is on:
= set the timer
U
■
r
= set the cooking time
■
p
= delay the end time
■
The square brackets around the symbol indicate that this
function has been selected. After pressing the
square brackets indicate the time function on the display panel.
Setting the time-setting options in brief
Press the
button to open the menu.
0
1.
Select the desired function with the
2.
symbol.
n
button or
%
n
button again, operation
<
and a
button. The
0
n
button, the
button.
X
Setting the cooking time
See section Time-setting options, setting the cooking time.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Setting the rapid heating function
The rapid heating is not compatible with all types of heating.
Compatible types of heating
3D hot air
<
Top and bottom heating
%
Pizza function
6
When the programmed heating type is not compatible with
rapid heating, a warning signal is emitted.
Suitable temperatures
The rapid heating does not work when the set temperature is
below 100 ° C. If the oven temperature is slightly less than the
set temperature, rapid heating is not necessary. Not turned on.
Setting the rapid heating function
Press the button
c
for rapid heating. The
displayed beside the temperature. The temperature control
bars fill up.
The rapid heating function has ended when all the bars are lit.
A brief signal sounds. The
the oven.
Notes
Rapid heating is cancelled by adjusting the type of heating.
■
The programmed cooking time begins to run, regardless of
■
the rapid heating.
The oven temperature reached may be displayed while
■
heating by pressing on the button
To ensure uniform cooking, the food must not be put into the
■
oven until rapid heating has been completed.
Cancelling rapid heating
Press the
button. The symbol goes out.
c
Set the desired value with the rotary selector.
3.
Press the
0
button to close the menu.
4.
A detailed description of how to adjust each individual function
is provided below.
Short audible signal
If you cannot change or set a value, you will hear a short
audible signal.
Programming the timer
The timer works independently of the oven. It can be used as a
kitchen timer and programmed at any time. It does not matter
whether the oven is switched on or off.
Press the
button.
0
1.
The time function menu opens. The [
square brackets indicates that the "Timer" function has been
selected.
Set the time for the timer using the control knob.
2.
Close the menu with the
3.
The time indicator shows the time elapsed from the set time.
c
symbol is
symbol turns off. Put the food in
c
.
°
U
] symbol between the
0
button.
9