Electrolux 400 SERIES 사용 및 관리 매뉴얼 - 페이지 17

{카테고리_이름} Electrolux 400 SERIES에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 400 SERIES 28 페이지. Front load dryer
Electrolux 400 SERIES에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (16 페이지), 사용 및 관리 매뉴얼 (39 페이지), 설치 지침 매뉴얼 (50 페이지), 사용 및 관리 매뉴얼 (46 페이지)

페이지 인쇄

Dryness Level (dryness)

To set or change the dryness level, press

the dryness button to scroll to the desired

setting.

The dryness levels include max (on select

models), high, normal, less (on select

models), and damp. Most Auto Dry cycles

default to the normal dryness level.

Occasionally a load may seem too damp

or over-dried at the end of the cycle. To

increase drying time for similar loads in the

future, select high or max (on select mod-

els). To decrease drying time for similar

loads, select less (on select models).

Select damp for items you wish to partially

dry before hanging or ironing.

Drying time (time dry)

Manually select or change the drying time

for a time dry cycle (on select models)

by pressing the time dry button to scroll

though the available options. Time dry

options include 30, 45, 60 and 75 minutes

(dependent on model).

The auto selection is a default for all auto

dry cycles and fast dry cycles and can-

not be selected or changed. All actual or

predicted dry times will count down on the

LED display.

Cycle Options

To select an option, press options and

scroll though the options until the indicator

light for the desired option flashes, then

press select (set). The indicator will illumi-

nate when the option has been selected.

Follow the same steps to deselect an

option. The indicator light will turn off when

the option is deselected.

options

NOTE

To change a cycle option once the cycle

has begun, press the start/pause but-

ton, make the new selection and press

start/pause again.

To protect your fabrics, not all options are

available with every cycle. If an option is

not available for a cycle, the indicator will

not light.

Occasionally, two options or settings in the

same cycle will conflict with each other, like

Controls and Settings

select

de-select

eco option and sanitize temperature (on

select models). When this happens, the

option selected first will cause the conflict-

ing option to not be selectable.

perfect steam

The perfect steam

into the clothing prior to cool down to

reduce wrinkling, ironing and static cling.

NOTE

It is not recommended to use fabric soft-

ener sheets with steam cycles or steam

options as it may cause staining on clothes.

anti-static (on select models)

The anti-static option injects steam into

the clothing just before cycle completion to

reduce static.

eco

The eco option reduces the

drying temperature a few de-

grees to save energy. In conjunction with

automatic moisture sensors, cycle times

will increase slightly, but overall energy

usage will decrease. The eco icon will il-

luminate on the LED display to indicate the

eco option is activated.

wrinkle release

The wrinkle release option helps prevent

wrinkles and tangling by tumbling the dry

load without heat for 5 minutes out of every

10 minutes. The 5 minutes on and 5 min-

utes off is repeated for a total 45 minutes.

A chime will sound after each tumble as a

reminder to remove the dried load.

extended tumble (on select models)

Select the extended tumble option if the

dried load might not be removed promptly

at the end of the cycle. The dried load will

tumble continuously without heat for 30

minutes. A chime will sound periodically to

remind you to remove the dried load.

NOTE

When extended tumble and wrinkle

release options are both selected the

amount of time the load will tumble with-

out heat will increase to a period of up to

75 minutes.

delay time (on select models)

Use delay time to delay the

start of the drying cycle to a time

convenient to your schedule or

(on select models)

option injects steam