Electrolux EFLS210TIS 사용 및 관리 매뉴얼 - 페이지 14

{카테고리_이름} Electrolux EFLS210TIS에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux EFLS210TIS 22 페이지. Front load dryer
Electrolux EFLS210TIS에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (29 페이지)

페이지 인쇄

Care and Cleaning

Cleaning the Dryer

WARNING

To reduce risk of fire or serious injury to

persons or property, comply with the basic

warnings listed in the Important Safety

Instructions and those listed below.

• Before cleaning the dryer interior, unplug

the electrical power cord to avoid electrical

shock hazards.

• Do not use any type spray cleanser when

cleaning the dryer interior. Hazardous fumes

or electrical shock could occur.

Inside

• Clean the lint filter after every load. Lint

build-up on the filter restricts air flow, which

causes longer drying times. The filter is

located at the bottom of the door opening.

Remove by pulling straight up. Remove the

lint and replace the filter.

• Occasionally a waxy build-up may form on

the lint filter and/or moisture sensing bars

from using dryer-added fabric softener

sheets. To remove this build-up, wash

them with warm, soapy water. Dry the filter

thoroughly and replace. Do not operate the

dryer without the lint filter in place.

• If the dryer drum becomes stained from

non-colorfast fabrics, clean the drum with

a damp cloth and a mild liquid household

cleanser. Remove cleanser residue before

drying the next load.

• See next page for more information regarding

cleaning of the condenser assembly.

Outside

• Clean the cabinet with mild soap and water.

Never use harsh, gritty or abrasive cleansers.

• Remove debris and lint from the front of the

condenser door with a vacuum cleaner.

• Remove glue residue from tape or labels

with a mixture of warm water and mild

detergent. Or, touch residue with the sticky

side of the tape or label.

• Before moving the dryer, place a strip of

cardboard or thin fiberboard under the front

leveling legs to prevent damage to the floor.

IMPORTANT

Do not store or place laundry products on

top of dryer at any time. They can damage

the finish or controls.

IMPORTANT

Clean the lint filter and dump water

container after every load.