Draytek Vigor167 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} Draytek Vigor167에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draytek Vigor167 15 페이지. 35b modem
Draytek Vigor167에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (14 페이지), 빠른 시작 매뉴얼 (15 페이지), 빠른 시작 매뉴얼 (14 페이지)

페이지 인쇄

To use the Vigor 167 as your DSL modem with a router or PC, simply connect the

modem to the VDSL or ADSL line and connect your router / PC to the Vigor 167's

LAN port.

The Vigor 167 is a full-bridge modem, which will bridge ADSL and VDSL

connections out of the box. Just configure the PPPoE or DHCP connection on your

router / PC. Verify your router or PC is connected by checking the LAN P1 and P2

LEDs on the modem.

In its default 'modem' or 'bridge' mode, the Vigor 167 does not provide DHCP for

local management, manually configure a PC to access its web interface.

Note

Open a web browser on your PC and type http://192.168.2.1. A pop-up window

will open to ask for username and password. Please type "admin/admin" as the

Username/Password and click Login.

Wait a few seconds for the web interface to load, indicated by a red line at the

top of the page.

Configure the IP address of the computer to be within the same

subnet. The default IP address of Vigor 167 modem is

192.168.2.1, with a subnet mask of 255.255.255.0.

For a full demonstration of how to configure an IP address

manually, see this guide:

https://www.draytek.co.uk/support/guides/kb-windows-fixedip