Draytek Vigor167 Краткое руководство по эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Модем Draytek Vigor167. Draytek Vigor167 15 страниц. 35b modem
Также для Draytek Vigor167: Краткое руководство по эксплуатации (14 страниц), Краткое руководство по эксплуатации (15 страниц), Краткое руководство по эксплуатации (14 страниц)

To use the Vigor 167 as your DSL modem with a router or PC, simply connect the

modem to the VDSL or ADSL line and connect your router / PC to the Vigor 167's

LAN port.

The Vigor 167 is a full-bridge modem, which will bridge ADSL and VDSL

connections out of the box. Just configure the PPPoE or DHCP connection on your

router / PC. Verify your router or PC is connected by checking the LAN P1 and P2

LEDs on the modem.

In its default 'modem' or 'bridge' mode, the Vigor 167 does not provide DHCP for

local management, manually configure a PC to access its web interface.

Note

Open a web browser on your PC and type http://192.168.2.1. A pop-up window

will open to ask for username and password. Please type "admin/admin" as the

Username/Password and click Login.

Wait a few seconds for the web interface to load, indicated by a red line at the

top of the page.

Configure the IP address of the computer to be within the same

subnet. The default IP address of Vigor 167 modem is

192.168.2.1, with a subnet mask of 255.255.255.0.

For a full demonstration of how to configure an IP address

manually, see this guide:

https://www.draytek.co.uk/support/guides/kb-windows-fixedip