Drayton 13616 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Drayton 13616에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drayton 13616 16 페이지. Digistat+ cf rf cylinder thermostat
Drayton 13616에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지)

페이지 인쇄

To assist with commissioning or checking the system operation,

there is a positive OFF setting outside the temperature scale on the

cylinder thermostat. First adjust the minimum temperature setting

to 40

C as described in the user guide, then rotate the dial fully

anticlockwise for OFF.

Signal Strength

Before fixing the Digistat+C RF to the wall it is recommended to first

check the signal strength from that location.

To do this, remove the batteries, press and hold the 'set' button whilst

refitting the batteries, keep the 'set' button held and after a few

seconds the display will show 'rF' which indicates that the Digistat+C RF

is continuously sending an OFF signal to the SCR (receiver). Leave the

Digistat+C RF in position and return to view the SCR. If the red LED is

continuously flashing, this indicates a good signal. If the red LED is not

flashing, this indicates a poor signal and you need to reposition the

Digistat+C RF until the red LED is flashing.

When the signal strength has been confirmed remove the batteries to

cancel the test and follow the installation instructions.