Bosch Vision 800 Series 설치 지침 매뉴얼 - 페이지 12

{카테고리_이름} Bosch Vision 800 Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Vision 800 Series 28 페이지. Gas slide-in ranges
Bosch Vision 800 Series에 대해서도 마찬가지입니다: 사용 설명서 지침 (40 페이지), 치수 및 사양 (2 페이지), 설치 매뉴얼 (6 페이지), 서비스 매뉴얼 (43 페이지), 서비스 매뉴얼 (36 페이지)

페이지 인쇄

Attaching the Toe Panel

Your dishwasher comes with either a two-piece or three-

piece toe panel (model dependent) to allow height adjust-

ment.

of the rear toe panel allowing the angled edge to rest

on the mating edge of the dishwasher.

3. Drive the two black screws (A) through the holes in the

toe panel to secure. Use the supplied screws to avoid

damaging the dishwasher. See Figure 24.

4. For models with a three-piece toe panel, the rubber

apron removed earlier may now be attached and should

remain behind the outermost toe panel.

5. For models with outer toe panel (3rd piece - N) slide

you just attached.

6. Once you determine the correct position for the brack-

ets, remove the bracket and bend the metal tab. See

Figure 25. This ensures that the toe panel will not slide

in further than you need.

7. Re-insert the brackets.

8. Attach the outer toe panel (N) onto the brackets and drive

the screws provided (O) in place to secure the toe panel

ensuring that the rubber apron is completely hidden

behind the outer toe panel.

Figure 24

Figure 25