FORM & REFINE POSITION BENCH 155 조립 설명서

{카테고리_이름} FORM & REFINE POSITION BENCH 155에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. FORM & REFINE POSITION BENCH 155 2 페이지.

P O S I T I O N B E N C H 1 5 5

Assembly guide

STEP 1

Place the seat bottom up on any larger table.

To protect the surface from scratches lay a

piece of textile or cardboard under the seat.

STEP 2

Place the leg frames above the bushings.

Using the included hex key, mount the screws

in the seat. Tighten the screws properly,

though without fully tightening them.

STEP 3

Place the two brass parts on the seat and

mount the short brass screws. Tighten

the screws with a flat-head screwdriver.

Important note: Brass is softer than iron,

therefore be careful not to scratch the screw.