FORM & REFINE POSITION BENCH 155 Посібник з монтажу

Переглянути онлайн або завантажити pdf Посібник з монтажу для Внутрішнє оздоблення приміщень FORM & REFINE POSITION BENCH 155. FORM & REFINE POSITION BENCH 155 2 сторінки.

Друкувати сторінку
FORM & REFINE POSITION BENCH 155 Посібник з монтажу
P O S I T I O N B E N C H 1 5 5
Assembly guide
STEP 1
Place the seat bottom up on any larger table.
To protect the surface from scratches lay a
piece of textile or cardboard under the seat.
STEP 2
Place the leg frames above the bushings.
Using the included hex key, mount the screws
in the seat. Tighten the screws properly,
though without fully tightening them.
STEP 3
Place the two brass parts on the seat and
mount the short brass screws. Tighten
the screws with a flat-head screwdriver.
Important note: Brass is softer than iron,
therefore be careful not to scratch the screw.