Bosch 11316EVS - SDS Max Demolition Hammer 14A Motor 운영 정보
{카테고리_이름} Bosch 11316EVS - SDS Max Demolition Hammer 14A Motor에 대한 운영 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch 11316EVS - SDS Max Demolition Hammer 14A Motor 3 페이지. Bosch demolition hammer parts list
Bosch 11316EVS - SDS Max Demolition Hammer 14A Motor에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (25 페이지), 작동/안전 지침 매뉴얼 (29 페이지), 부품 목록 (2 페이지), 작동/안전 지침 매뉴얼 (33 페이지), 작동/안전 지침 매뉴얼 (33 페이지)
![Bosch 11316EVS - SDS Max Demolition Hammer 14A Motor 운영 정보](/uploads/products/server2/1398379/1398379.jpg)
Hammerdrill, nonrot - Bosch 11316EVS
Operating Information
IMPORTANT:
Electric tools may use any number of symbols to designate electrical specifications. Proper interpretation of
these symbols will allow you to operate the tool better and safer. Please study these symbols on the following link and
learn their meaning:
Electric Tool Symbols
SLIDE "ON-OFF" SWITCH
The tool is switched "ON" by the slide switch 9 located in the rear handle. TO TURN THE TOOL "ON" slide the switch to the
right. TO TURN THE TOOL"OFF " slide the switch to the left.
VARIABLE SPEED DIAL
Your tool is equipped with a variable speed dial. The impact rate (BPM) and rotating speed (RPM) can be varied according
to the type of work being performed by setting the variable speed dial to the selected setting. The chart below will help
you to determine which setting to use for your application. However, a pre-test will determine the best speed setting, as
the chart is intended only as a guide. Once the proper setting is determined the impact rate and rotating speed is kept
constant by means of the "Electronic Feedback Circuitry". The variable speed dial can be adjusted while the motor is
running with the tool free from work, allowing the operator to adjust the impact rate and rotating speed according to the
actual application.
Chipping (Demolition)