Bosch 11316EVS - SDS Max Demolition Hammer 14A Motor 운영 정보 - 페이지 3
{카테고리_이름} Bosch 11316EVS - SDS Max Demolition Hammer 14A Motor에 대한 운영 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch 11316EVS - SDS Max Demolition Hammer 14A Motor 3 페이지. Bosch demolition hammer parts list
Bosch 11316EVS - SDS Max Demolition Hammer 14A Motor에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (25 페이지), 작동/안전 지침 매뉴얼 (29 페이지), 부품 목록 (2 페이지), 작동/안전 지침 매뉴얼 (33 페이지), 작동/안전 지침 매뉴얼 (33 페이지)
페이지 인쇄
AUXILIARY HANDLE
The tool must be supported with the auxiliary handle , which can be swiveled 360 degrees . To reposition and/or swivel the
handle, loosen the hand grip, move the handle to the desired position along the barrel and securely retighten the hand
grip.
"TOOL TIPS"
For the best penetration rates in concrete, run the tool with a steady pressure, but do not use excessive force as this will
decrease the efficiency of the tool. All grease packed hammers require a short period of time to warm up. Depending on
the room temperature, this time may vary from approximately 15 seconds (90 F) to 2 minutes (32 F). A new hammer
requires a break-in period before full performance is realized. This period may require up to 5 hours of operation. An
electric hammer is likely to be the most expensive portable tool at the construction job. The long wear and efficient
operation of the BOSCH hammers will more than justify the cost for tools of this type. As earlier pointed out, sharp
accessories as well as clean air vents are necessary for efficient operation. Establish and follow a set maintenance
program.