Bosch 125 A 원본 사용 설명서 - 페이지 9

{카테고리_이름} Bosch 125 A에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch 125 A 13 페이지. Gex professional
Bosch 125 A에 대해서도 마찬가지입니다: 원본 사용 설명서 (11 페이지)

페이지 인쇄

20 | English

Dust/Chip Extraction

Avoid touching or breathing-in dusts that are

harmful to one's health or carcinogenic. Al-

ways use suitable dust extraction, work in

well ventilated areas and wear appropriate

protective equipment. When disposing of

dusts, pay attention that you or other per-

sons do not come into contact with these

dusts. Dusts dangerous to one's health devel-

op, e.g., when sanding lead-containing coat-

ings, chemically treated woods or some met-

als.

Integrated Dust Extraction with Dust Box

(see figures C1 – C4)

Before assembling the dust box 6, pull out the

plastic slider 12. Place the dust box 6 onto the

extraction outlet 13 and allow it to engage. Make

sure that the plastic slider 12 engages in the

holder 11.

To empty the dust box 6, press the latching

levers 14 on the side of the dust box ( ). Pull off

the dust box toward the bottom ( ).

Before opening the dust box 6, it is recommend-

ed to loosen the dust from the filter element by

gently striking it against a firm support (as shown

in the figure).

Grasp the dust box 6 by the recessed grip, fold

the filter element 15 upward and empty the dust

box. Clean the thin plates of the filter element 15

with a soft brush.

External Dust Extraction (see figure D)

Slide the extraction adapter 16 onto the outlet

piece 13. Ensure that the latching levers of the

extraction adapter engage. The extraction

adapter 16 accepts a vacuum hose with a diame-

ter of 19 mm.

For removal of the extraction adapter 16, press

the latching levers together at the rear and pull

the extraction adapter off.

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially detri-

mental to health or carcinogenic, use a special

vacuum cleaner.

2 609 932 594 | (14.8.07)

Internal Dust Extraction with Dust Bag

(see figure E)

For small sanding jobs, a dust bag (accessory) 18

can be connected.

Before mounting the dust bag 18, pull out the

plastic slider 12. Slide the dust-bag sleeve firmly

over the extraction outlet 13. Pay attention that

the plastic slider 12 engages in the holder intend-

ed for it on the dust bag 18.

To maintain optimum dust collection, empty the

dust bag 18 in good time.

Auxiliary Handle

The auxiliary handle 1 enables convenient han-

dling and optimal distribution of power, especial-

ly at high removal rates.

Fasten the auxiliary handle 1 with screw 2 to the

casing.

Operation

Starting Operation

Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V can

also be operated with 220 V.

Switching On and Off

To start the machine, press the On/Off switch 4

and keep it depressed.

To lock the pressed On/Off switch 4, press the

lock-on button 5.

To switch off the machine, release the On/Off

switch 4 or when it is locked with the lock-on but-

ton 5, briefly press the On/Off switch 4 and then

release it.

Preselecting the Orbital Stroke Rate

(GEX 125 AC/GEX 150 AC)

With the thumbwheel for preselection of the or-

bital stroke rate 3, you can preselect the required

orbital stroke rate, even during operation.

1 – 2

Low stroke rate

3 – 4

Medium stroke rate

5 – 6

High stroke rate

Bosch Power Tools