Bosch 125 A Oryginalna instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Oryginalna instrukcja obsługi dla Elektronarzędzie Bosch 125 A. Bosch 125 A 13 stron. Gex professional
Również dla Bosch 125 A: Oryginalna instrukcja obsługi (11 strony)
Drukuj stronę
20 | English
Dust/Chip Extraction
Avoid touching or breathing-in dusts that are
harmful to one's health or carcinogenic. Al-
ways use suitable dust extraction, work in
well ventilated areas and wear appropriate
protective equipment. When disposing of
dusts, pay attention that you or other per-
sons do not come into contact with these
dusts. Dusts dangerous to one's health devel-
op, e.g., when sanding lead-containing coat-
ings, chemically treated woods or some met-
als.
Integrated Dust Extraction with Dust Box
(see figures C1 – C4)
Before assembling the dust box 6, pull out the
plastic slider 12. Place the dust box 6 onto the
extraction outlet 13 and allow it to engage. Make
sure that the plastic slider 12 engages in the
holder 11.
To empty the dust box 6, press the latching
levers 14 on the side of the dust box ( ). Pull off
the dust box toward the bottom ( ).
Before opening the dust box 6, it is recommend-
ed to loosen the dust from the filter element by
gently striking it against a firm support (as shown
in the figure).
Grasp the dust box 6 by the recessed grip, fold
the filter element 15 upward and empty the dust
box. Clean the thin plates of the filter element 15
with a soft brush.
External Dust Extraction (see figure D)
Slide the extraction adapter 16 onto the outlet
piece 13. Ensure that the latching levers of the
extraction adapter engage. The extraction
adapter 16 accepts a vacuum hose with a diame-
ter of 19 mm.
For removal of the extraction adapter 16, press
the latching levers together at the rear and pull
the extraction adapter off.
The vacuum cleaner must be suitable for the ma-
terial being worked.
When vacuuming dry dust that is especially detri-
mental to health or carcinogenic, use a special
vacuum cleaner.
2 609 932 594 | (14.8.07)
Internal Dust Extraction with Dust Bag
(see figure E)
For small sanding jobs, a dust bag (accessory) 18
can be connected.
Before mounting the dust bag 18, pull out the
plastic slider 12. Slide the dust-bag sleeve firmly
over the extraction outlet 13. Pay attention that
the plastic slider 12 engages in the holder intend-
ed for it on the dust bag 18.
To maintain optimum dust collection, empty the
dust bag 18 in good time.
Auxiliary Handle
The auxiliary handle 1 enables convenient han-
dling and optimal distribution of power, especial-
ly at high removal rates.
Fasten the auxiliary handle 1 with screw 2 to the
casing.
Operation
Starting Operation
Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V can
also be operated with 220 V.
Switching On and Off
To start the machine, press the On/Off switch 4
and keep it depressed.
To lock the pressed On/Off switch 4, press the
lock-on button 5.
To switch off the machine, release the On/Off
switch 4 or when it is locked with the lock-on but-
ton 5, briefly press the On/Off switch 4 and then
release it.
Preselecting the Orbital Stroke Rate
(GEX 125 AC/GEX 150 AC)
With the thumbwheel for preselection of the or-
bital stroke rate 3, you can preselect the required
orbital stroke rate, even during operation.
1 – 2
Low stroke rate
3 – 4
Medium stroke rate
5 – 6
High stroke rate
Bosch Power Tools