Anchor F3 설치 지침 매뉴얼 - 페이지 15

{카테고리_이름} Anchor F3에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor F3 16 페이지. Frame tent

STEP 4

Install Fabric

Install Gable Ends. Insert End of Kedar (at top of Gable End Fabric) into bottom of channel at End of frame. Using pull web

loop, pull Gable end up until it is at the peak. Pull other half of Gable end up until both halves meet at center. See Lace

detail below. Optional Ridge Brace for 30' frame not shown.

Figure 4a

STEP 4

Install Mids and Raise

Frame

Install mid fabric as shown on page 9.

Instructions for Raising Frame, Staking & Guy-

ing Tent and Tensioning Fabric may be found on

pages 10 and 11.

Installation Cross Web

Installed (30' Frame only).

See Page 7 for installation.

Lifting Bar with Cradle could be used to push

Gable End Fabric up to top of Frame. Hook to

Web Loop at top of Gable End Fabric. (Included

with optional installation kit.)

Lace the halves of the Gable end together starting at top. See

Lacing detail. Tie oﬀ last loop to keep lace secure.

Figure 4b