Anchor F3 Installation Instructions Manual - Page 15

Browse online or download pdf Installation Instructions Manual for Tent Anchor F3. Anchor F3 16 pages. Frame tent

STEP 4

Install Fabric

Install Gable Ends. Insert End of Kedar (at top of Gable End Fabric) into bottom of channel at End of frame. Using pull web

loop, pull Gable end up until it is at the peak. Pull other half of Gable end up until both halves meet at center. See Lace

detail below. Optional Ridge Brace for 30' frame not shown.

Figure 4a

STEP 4

Install Mids and Raise

Frame

Install mid fabric as shown on page 9.

Instructions for Raising Frame, Staking & Guy-

ing Tent and Tensioning Fabric may be found on

pages 10 and 11.

Installation Cross Web

Installed (30' Frame only).

See Page 7 for installation.

Lifting Bar with Cradle could be used to push

Gable End Fabric up to top of Frame. Hook to

Web Loop at top of Gable End Fabric. (Included

with optional installation kit.)

Lace the halves of the Gable end together starting at top. See

Lacing detail. Tie oﬀ last loop to keep lace secure.

Figure 4b