Anchor NAV50-1204 사용자 설명서 - 페이지 12
{카테고리_이름} Anchor NAV50-1204에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor NAV50-1204 18 페이지. 50’ wide frame tent system
페이지 인쇄TENSIONING AND GUYING
1. USE WEB/RATCHETS TO SECURE CATENARY ARCHES TO
UPRIGHTS, STAKE BASEPLATES BEFORE TENSIONING WEBS.
2. ATTACH GUY WEBS TO EAVE WELDMENTS AND STAKE OUT AT
A 45 DEGREE ANGLE (DISTANCE OUT = HEIGHT OF UPRIGHT,
USUALLY 8 FT. USE 42" STAKES PROVIDED.
3. AT DOUBLE-GUYED CORNERS, GUYS FORM A 90 DEGREE ANGLE.
FABRIC STRAPS ON UNDERSIDE OF
BOTH HIP END PANELS MUST BE
SECURED AROUND RAFTERS AND HIP
BARS, AS PROVIDED. TO
CATENARY
TAILS
TOP
TENSIONING
WEB (LEFT)
W/ RING
WEB/RATCHET
TENSIONING METHOD:
1. PASS RING OF LEFT TENSIONING WEB THROUGH OPPOSITE
CATENARY RING.
2. PASS RING OF RIGHT TENSIONING WEB THROUGH ITS OWN
CATENARY RING (PASSING OVER THE LEFT WEB).
3. CONTINUE RING OF RIGHT TENSIONING WEB THROUGH
OPPOSITE CATENARY RING.
4. OVERLAP BOTH TENSION RINGS. ATTACH WEB/RATCHET
AND TENSION DOWNWARD AGAINST TENSION HOLE IN
UPRIGHT. (CATENARY RINGS SHOULD MOVE CLOSER
TOGETHER AS RATCHET IS TIGHTENED.)
TENSIONING
WEB (RIGHT)
W/ RING
TENSIONING RINGS
OVERLAPPED
UPRIGHT
CATENARY
TAILS
TRIANGLE
RING
WEB/RATCHET
UPRIGHT
STAKING DISCLAIMER: DUE TO VARYING SOIL CONDITIONS AT
EACH INSTALLATION SITE, THE STAKES PROVIDED MAY NOT
MEET THE LOADING REQUIREMENT SHOWN ON THE BLUEPRINT
AND ENGINEERING ANALYSIS. IT IS THE INSTALLERS RESPON-
SIBILITY TO VERIFY THE SOIL CONDITIONS AND PROPER
ANCHORING DEVICES REQUIRED AT EACH SITE TO ENSURE A
SAFE INSTALLATION.
DOTTED LINE REPRESENTS THE
RAFTER THAT IS IN LINE WITH THE
PEAK/RIDGE WELDMENT.
TOP
CATENARY
TAILS
TENSION RINGS
(OVERLAPPED)
TENSIONING METHOD:
1. PASS BOTH TENSION RINGS
THROUGH THE TRIANGLE RING.
2. OVERLAP THEM AND ATTACH
WEB/RATCHET TO TENSION
DOWNWARD.
TOP
TENSIONING METHOD-
ATTACH WEB/RATCHET
TO TRIANGLE RING AND
TENSION DOWNWARD.
11-T
11