Electrolux AUCI 설치, 운영 및 유지보수 매뉴얼 - 페이지 19

{카테고리_이름} Electrolux AUCI에 대한 설치, 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux AUCI 20 페이지. Undercounter dishwasher
Electrolux AUCI에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지)

페이지 인쇄

INEFFICIENT DRAINAGE

Check if the overflow has been removed.

Check for obstruction on the waste outlet pipe and

the overflow aperture.

TANK WATER LEVEL TOO HIGH

Check for obstruction on the waste outlet pipe and

the overflow aperture.

CALL THE SERVICE CENTRE

C1..C8

CALL THE SERVICE CENTRE

E1..E8

The appliance continues to operate, but appro-

priate checks by a technician are recommended.

CALL THE SERVICE CENTRE

F21..F22

DETERGENT/RINSE-AID DISPENSERS AND

SETTINGS

If the appliance is connected to a water softener or

osmotic device, contact the detergent supplier for a

specific product.

Peristaltic dispensers (rinse-aid and detergent) require

periodic maintenance. The internal hose of the rinse-

aid dispenser should undergo periodic maintenance

(at least once or twice a year).

1. Dishwasher with incorporated detergent dis-

penser pump (Figure 13).

Pump "R" dispenses about 0.9 g/s of detergent. When

the appliance is filled with water for the first time in the

day, it dispenses about 44 g of detergent in 45 sec.,

thereby providing a concentration of 2 g/l. Pump "R"

dispenses about 6 g in 6 sec. at each cycle.

Dispenser operating time may be changed, following

the instructions given in the next paragraph.

Insert the hose provided in the kit into the detergent

container.

2. Dishwashers

with

rinse-aid dispenser pump (Figure 13).

Pump "S" dispenses about 0.1 g/s of rinse-aid. It

dispenses 0.3 g in 3 sec. at each rinse.

Dispenser operating time may be changed, following

the instructions given in the next paragraph.

Insert the hose provided in the kit into the rinse-aid

container (in the versions without incorporated rinse-

aid dispenser only).

3. Dishwashers

with

diaphragm dispenser pump (Figure 13).

Pump "T" is installed in appliances with pressure boi-

ler.

Dispensed amounts may be changed according to the

instructions given in the paragraph below.

Insert the supplied hose into the rinse-aid container (in

the versions without incorporated rinse-aid dispenser

only).

incorporated

peristaltic

incorporated

rinse-aid

Connections for automatic detergent dispenser

(Figure 13)

Figure 13

There is a ready-made impression "N" to be perforated

(Ø 8 mm) for positioning the detergent concentration

measuring sensor.

Inside the tank there is a hole "P" (Ø 10 mm) closed

with a plug, which may be used for mounting a liquid

detergent injector.

The Ecotemp versions have a hole "N" (Ø 22 mm) clo-

sed with a plug. The sensor and liquid detergent

injector should be installed without prejudicing the

watertightness of the appliance.

Electrical connections for automatic detergent and

rinse-aid dispensers

Terminals are available on the power supply terminal

board for the electrical connection of external dispen-

sers working at 220...240 V. Max. power 30 VA.

Figure 14

•

Connect the detergent dispenser between termi-

nals 7 and 9. These connection points are live for a

set time during filling of the tank and at the start of