Anchor AF-4003 빠른 설정 매뉴얼 - 페이지 3

{카테고리_이름} Anchor AF-4003에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor AF-4003 9 페이지. Under counter water filter system
Anchor AF-4003에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (10 페이지), 빠른 설정 매뉴얼 (9 페이지)

페이지 인쇄

Tools & Materials

Required for Installation

• Drill with 1/2" Drill Bit (type as

required) if faucet needs to be

mounted

• Adjustable Open-End Wrenches

• Phillips and Flat Blade Screwdrivers

• Feed water supply valve and adapter

Installing your filter

IMPORTANT

- Install or store where it will not be exposed to temperatures below

freezing or exposed to any type of weather. Water freezing in the

system will damage it.

- Recommended installation is under the sink. However, the unit can

be installed in a remote location, up to 20 feet away from the sink.

Additional installation materials may be required.

- Be sure there is room underneath the sink to make the needed

connections.

- If installed under sink, leave enough tubing in place during

installation to be able to move unit to floor for ease at servicing and

making filter cartridge changes.

- Do not install on HOT WATER. Temperature of water supply to filter

system must be between minimum of 40°F and maximum of 90°F.

- The assembly can stand up in sink cabinet or can be hung on screws.

- Use PTFE (Teflon) tape for the fittings and do not overtighten.

Color Code For Tubing

Use the color-coded tubing to make connections as follows:

A. Red tubing connects water supply adapter to inlet side of the

assembly

B. Blue tubing connects the faucet to the outlet side of assembly

Faucet

Blue

Tubing

Out