Anchor AF-4003 Manual de configuração rápida - Página 3
Procurar online ou descarregar pdf Manual de configuração rápida para Sistemas de filtragem de água Anchor AF-4003. Anchor AF-4003 9 páginas. Under counter water filter system
Também para Anchor AF-4003: Manual de instruções de instalação (10 páginas), Manual de configuração rápida (9 páginas)
Imprimir página
Tools & Materials
Required for Installation
• Drill with 1/2" Drill Bit (type as
required) if faucet needs to be
mounted
• Adjustable Open-End Wrenches
• Phillips and Flat Blade Screwdrivers
• Feed water supply valve and adapter
Installing your filter
IMPORTANT
-
- Install or store where it will not be exposed to temperatures below
freezing or exposed to any type of weather. Water freezing in the
system will damage it.
- Recommended installation is under the sink. However, the unit can
be installed in a remote location, up to 20 feet away from the sink.
Additional installation materials may be required.
- Be sure there is room underneath the sink to make the needed
connections.
- If installed under sink, leave enough tubing in place during
installation to be able to move unit to floor for ease at servicing and
making filter cartridge changes.
- Do not install on HOT WATER. Temperature of water supply to filter
system must be between minimum of 40°F and maximum of 90°F.
- The assembly can stand up in sink cabinet or can be hung on screws.
- Use PTFE (Teflon) tape for the fittings and do not overtighten.
Color Code For Tubing
Use the color-coded tubing to make connections as follows:
A. Red tubing connects water supply adapter to inlet side of the
assembly
B. Blue tubing connects the faucet to the outlet side of assembly
Faucet
B
A
Blue
Tubing
Out
In
3