Athena BATHROOMS Fleet Vanity 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Athena BATHROOMS Fleet Vanity에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Athena BATHROOMS Fleet Vanity 8 페이지.

Removing the Drawer

1. Open the drawer fully.

2. On the underside of the Drawer locate the tabs on each side and press

the tabs while lifting the Drawer and pulling towards the front at the

same time. This will release the Drawer from it's runners.

1. Place the Drawer over the runners.

2. Slide the Drawer inwards.

3. Push until it clicks.

4. To ensure the Drawer is properly secured, hold the Drawer

front and pull the clip/runner on each side towards the Drawer

front. You will hear a click if the Drawer was not in position;

this means the rear of the Drawer has located itself correctly

into a tab on the rear of the runner.

Pull clip forward

Rear locating tab

Press Tab