Electrolux ESF 6720ROW 사용자 설명서 - 페이지 13
{카테고리_이름} Electrolux ESF 6720ROW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux ESF 6720ROW 20 페이지. Electrolux911 417 023
페이지 인쇄7. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
7.1 Using the detergent
A
7.2 Setting and starting a
programme
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance a few minutes after:
• You have not closed the door.
• You have not pressed Start to start the
programme.
• The programme is completed.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. The indicator and the dura-
tion of the last set programme come
on.
3. Close the appliance door.
4. Set a programme.
• If you want to start the last set pro-
gramme, press Start
• If you want to set the MyFavourite
programme, press MyFavourite.
B
30
A
20
+
-
C
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree of
soil.
1.
Press the release button (B) to open
the lid (C).
2.
Put the detergent in the compartment
(A) .
3.
If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
4.
If you use detergent tablets, put the
tablet in the compartment (A).
5.
Close the lid. Make sure that the re-
lease button locks into position.
The indicators that are related to the
MyFavourite programme and op-
tions come on.
• If you want to set a different pro-
gramme, press Program again and
again until the indicator of the pro-
gramme you want to set comes on.
You can also set the applicable op-
tions.
The display shows the duration of the
programme.
5. Press Start to start the programme.
• When the programme starts, only
the programme duration and the
programme bar are visible. If you
want to see which programme and
options are set, press any touchpad
(not Reset). The set programme and
options are visible for a few sec-
onds.
• The programme duration starts to
decrease with steps of 1 minute.
Starting a programme with delay
start
1. Set the programme.
2. Press Delay again and again until the
display shows the delay time you want
ENGLISH
13