Electrolux ESF 6720ROW User Manual - Page 13

Browse online or download pdf User Manual for Dishwasher Electrolux ESF 6720ROW. Electrolux ESF 6720ROW 20 pages. Electrolux911 417 023

Print Page

1. Troubleshooting

7. DAILY USE

1. Open the water tap.

2. Press the on/off button to activate the

appliance.

• If the salt indicator is on, fill the salt

container.

• If the rinse aid indicator is on, fill the

rinse aid dispenser.

7.1 Using the detergent

7.2 Setting and starting a

programme

The Auto Off function

To decrease the energy consumption, this

function automatically deactivates the ap-

pliance a few minutes after:

• You have not closed the door.

• You have not pressed Start to start the

programme.

• The programme is completed.

Starting a programme without

delay start

1. Open the water tap.

2. Press the on/off button to activate the

appliance. The indicator and the dura-

tion of the last set programme come

on.

3. Close the appliance door.

4. Set a programme.

• If you want to start the last set pro-

gramme, press Start

• If you want to set the MyFavourite

programme, press MyFavourite.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme

for the type of load and the degree of

soil.

Press the release button (B) to open

the lid (C).

Put the detergent in the compartment

(A) .

If the programme has a prewash

phase, put a small quantity of deter-

gent on the inner part of the appli-

ance door.

If you use detergent tablets, put the

tablet in the compartment (A).

Close the lid. Make sure that the re-

lease button locks into position.

The indicators that are related to the

MyFavourite programme and op-

tions come on.

• If you want to set a different pro-

gramme, press Program again and

again until the indicator of the pro-

gramme you want to set comes on.

You can also set the applicable op-

tions.

The display shows the duration of the

programme.

5. Press Start to start the programme.

• When the programme starts, only

the programme duration and the

programme bar are visible. If you

want to see which programme and

options are set, press any touchpad

(not Reset). The set programme and

options are visible for a few sec-

onds.

• The programme duration starts to

decrease with steps of 1 minute.

Starting a programme with delay

start

1. Set the programme.

2. Press Delay again and again until the

display shows the delay time you want

ENGLISH