AND TM2440-EX 사용 설명서

{카테고리_이름} AND TM2440-EX에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AND TM2440-EX 2 페이지. Ambulatory blood pressure monitor

Ambulatory Blood Pressure Monitor TM2440-EX,

Instruction Manual, Corrections and Additions

Thank you for purchasing the Ambulatory Blood Pressure Monitor TM2440-EX. The Instruction Manual that

accompanies the product has been corrected and had content added. Please read it in conjunction with the

details shown below.

Instruction manual Page 22 6.1. Automatic Blood Pressure Measurement (A-BPM)

The following changes have been made.

The initial pressurization value is set to 180 mmHg at the

factory.

Instruction manual Page 37 8.2.3. Initial Pressurization Value

The following changes have been made.

The initial pressurization value is set to 180 mmHg at the

factory.

Instruction Manual Page 37 8.3. A-BPM Preset Programs

The following is added after

Wrong

A-BPM can use only while the automated measurement can be performed.

The Start time and Operation time are initially set calculating from the

time at which the

automatic measurement is made, this needs to be set again.

The initial pressurization value for automatic blood pressure

measurement is AUTO.

In the case of AUTO, the appropriate pressurization value

is set automatically.

The initial pressurization value setting is AUTO

(appropriate pressurization value set automatically) when

the

mark is displayed and 180 mmHg when the

mark is hidden.

Addition

Note

mark

was

displayed. When the

Correct

1WMPD4004497