Carmanah E Series 교체 매뉴얼 - 페이지 5
{카테고리_이름} Carmanah E Series에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah E Series 9 페이지. Traffic beacon systems
Carmanah E Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 설치 매뉴얼 (16 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 설치 매뉴얼 (20 페이지), 사용자 설명서 (18 페이지), 설치 매뉴얼 (18 페이지)
페이지 인쇄
2.0 Tools and Material Overview
The following parts are included in the E / F Series replacement solar panel kits:
•
1x solar panel assembly (E or F Series)
•
2x flat washer – stainless steel, 0.058" thick
•
2x spacer, nylon
•
2x 5/32" sealing rivet – stainless steel, 0.156" OD
•
3x 1/8" sealing rivet (all three only required for F Series systems)
•
3x black cable tie
•
3x door labels (two for legacy R247-E, R920 and one for E or F Series)
•
12.9 inches of foam tape (needed for E-Series only)
•
1x 8-32 tap
•
1x #29 (0.136") drill bit
The following tools are required:
•
Hand rivet tool with #2 (1/8") and #5 (5/32") rivet nosepieces (not included)
•
8-32 tap (included, required for legacy R920/R247-E only)
•
#29 (0.136") drill bit (included, required for legacy R920/R247-E only)
•
Side cutters for cutting cable ties
•
Large drill bit for drilling rivets
•
Electrical tape or wire nuts
This replacement kit allows for solar panel replacement for the legacy R920/R247-E solar engines with horizontal
opening solar panel, and newer E Series and F Series solar engines with vertically opening solar panel.
Current version – vertical opening
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
SOLAR PANEL REPLACEMENT GUIDE
Legacy version – horizontal opening
5
|
carmanah.com