Carmanah R247-G 매뉴얼 - 페이지 6

{카테고리_이름} Carmanah R247-G에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah R247-G 9 페이지. Wireless control
Carmanah R247-G에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 캐비닛 도어 교체 매뉴얼 (10 페이지), 매뉴얼 (10 페이지), 설치 매뉴얼 (14 페이지), 매뉴얼 (10 페이지), 매뉴얼 (10 페이지), 사용자 설명서 부록 (12 페이지)

페이지 인쇄
Carmanah R247-G 매뉴얼
3.1

Removing Solar Components

Battery removal should not be carried out in windy conditions. In all cases, the area at the base of
the post must be roped off to prevent people from being injured or killed by falling batteries.
1. Access the inside of the battery cabinet and remove the solar and battery fuses on the right side to shut
down power to the system.
2. Remove the battery harness on the battery. Do not short the wires together during this process. Cut the
cable tie securing the battery harness then unscrew the harness from the DC Input Power terminals.
3. Remove the battery from the cabinet.
4. Cut the cable tie securing the solar panel harness then unscrew the harness from the DC Input Power
terminals. Cap off the wires with wire nuts so they don't get shorted together during disassembly.
5. Remove the solar panel, solar panel harness, and solar panel mount from the pole.
6. Remove the battery bumpers as shown pictured below:
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
SOLAR TO AC RETROFIT GUIDE
|
carmanah.com
6