Carmanah MX Series 설치 매뉴얼 - 페이지 7

{카테고리_이름} Carmanah MX Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah MX Series 20 페이지. Radar detection kit
Carmanah MX Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 교체 매뉴얼 (4 페이지), 교체 매뉴얼 (2 페이지), 교체 매뉴얼 (4 페이지), 교체 매뉴얼 (2 페이지)

페이지 인쇄

3.4

Drill Holes for Radar Cable and Mount Through Bolts

If routing the radar cable inside the pole, drill a 5/8" hole in the center of where the radar mount will attach to the

pole. If through-bolting the radar mount, drill two 7/16" holes above and below as shown, through both sides of the

pole.

3.5

Fish Radar Cable, Install Radar & Mount to Pole

Install the radar module into the mount saddle with the cable facing down and fasten with the supplied spacers,

washers and screws as shown. Fish the radar cable through the mount, into the pole and up or down to the

Carmanah MX system. Bolt or band the radar mount to the pole.

Install the radar module with its cable facing down to optimize both detection range and

resistance to water ingress.

Pole mount to pole hardware not supplied.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

RADAR DETECTION KIT INSTALL GUIDE

[email protected]

carmanah.com

LEVEL 4