Carmanah MX Series Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Осветительное оборудование Carmanah MX Series. Carmanah MX Series 20 страниц. Radar detection kit
Также для Carmanah MX Series: Руководство по установке (2 страниц), Руководство по установке (2 страниц), Руководство по замене (4 страниц), Руководство по замене (2 страниц), Руководство по замене (4 страниц), Руководство по замене (2 страниц)

3.4

Drill Holes for Radar Cable and Mount Through Bolts

If routing the radar cable inside the pole, drill a 5/8" hole in the center of where the radar mount will attach to the

pole. If through-bolting the radar mount, drill two 7/16" holes above and below as shown, through both sides of the

pole.

3.5

Fish Radar Cable, Install Radar & Mount to Pole

Install the radar module into the mount saddle with the cable facing down and fasten with the supplied spacers,

washers and screws as shown. Fish the radar cable through the mount, into the pole and up or down to the

Carmanah MX system. Bolt or band the radar mount to the pole.

Install the radar module with its cable facing down to optimize both detection range and

resistance to water ingress.

Pole mount to pole hardware not supplied.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

RADAR DETECTION KIT INSTALL GUIDE

carmanah.com

LEVEL 4