Carmanah R247-E 사용자 설명서 - 페이지 13
{카테고리_이름} Carmanah R247-E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah R247-E 20 페이지. 24 hour flashing beacon
Carmanah R247-E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 설치 매뉴얼 (20 페이지)
페이지 인쇄
EMS Programming and
Testing
The EMS will be pre-confi gured at the factory. Use
the onboard interface to check the system status and
confi guration, or to make adjustments if necessary.
The energy management system (EMS) has several
programming functions and settings. These are
accessed through the onboard user interface (OBUI).
This section discusses the various functions, settings
and operation.
© 2014, Carmanah Technologies Corporation. 72466_R247-E_UserManual_RevA
R247-E 24 HOUR FLASHING BEACON USER MANUAL
EMS Onboard User Interface
Operation
The EMS OBUI has three buttons to navigate and
change settings and activate functions as required.
The up arrow, down arrow and set button are used to
scroll through menus, access and change settings,
and accept new settings.
Use arrow
buttons to
scroll through
the menu.
Functions and Settings
The functions and settings are accessed through the
OBUI via a menu system. On the next page is the
menu hierarchy and a description of the function or
setting.
NOTE
OTE
EMS PROGRAMMING AND TESTING
Press and
Use arrow
hold the set
buttons to
hold the set
button to edit
adjust the
accept new
a setting.
setting.
Display will
Display will
blink when
fl ash 3 times.
ready to edit.
set
Only these items in the menu
system are adjustable settings:
nItE, FLAS, tEnP, AAA, FACt, bISt
Press and
button to
setting.
set
13