Carmanah R247-E 사용자 설명서 - 페이지 15

{카테고리_이름} Carmanah R247-E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah R247-E 20 페이지. 24 hour flashing beacon
Carmanah R247-E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 설치 매뉴얼 (20 페이지)

페이지 인쇄

R247-E 24 HOUR FLASHING BEACON USER MANUAL

System Testing

Built-in System Test

The OBUI has a built-in system test function (bISt,

see previous section). Activating this function through

the OBUI performs the system test. After the test

completes, it will display any errors or 'PASS' if no

error is detected.

NOTE

OTE

Possible errors include:

Code

Error

0002

Severe temperature detected

0004

Onboard memory has failed

0008

Battery issue detected

0010

There is a problem with the on board processor

supply voltage

0020

Keypad failure detected

0040

Internal communication failure

0080

There is a problem with the ambient brightness

sensor

1000

There is a problem with the charging circuit, or

the PV is not connected, or not charging

2000

There is a problem with the ﬂ ashing LED

module, LED module wiring, or the LED driver

LED Fault Message

The EMS performs an internal test during start up

to check for any shorts or open circuits in the LED

ﬂ ashers and the associated wiring. If any faults are

detected this message will be displayed on the OBUI

before any other menu item.

EMS PROGRAMMING AND TESTING

It may be necessary to start the test

and then close the system so the solar

panel receives enough light to pass the

charging test.

The test is completed after the ﬂ ashing

LED module turns on steadily for

several seconds and returns to regular

operations.